Duke Light’s LED-HB-2003-PC-19-60D Series LED high-bay and low-bay fixture with 19 inch PC Reflector Beam Angle 60 Degree, Has the appearance and innovation of the thermal structure design patents, provides an unmatched combination of high performance and affordability, eliminating the need for energy-wasting fluorescent and HID high-bay luminaires, making it an ideal choice for retail and commercial applications.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
General Area Spaces Lighting
Grocery Store Lighting
LED-HB-2003-PC-19-60D Series for high/low bay lighting expands the application range, replacing from 300W PSMH.
Efficient light output, advanced optics and drive systems, significantly improving the economic value of end-use applications.
LM80 COB LEDs up to 140 lm/w, L70@25°C 50,000+ hours, High transmittance (90%) PC Dome. Non-Glare.
IP67 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
UL Listed Class I drivers, IP67 waterproof rating used for wet location. IP68 Waterproof connector, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input).
IP67 rating housing, One-piece metal stamping aluminum housing for excellent durability and strength. IK8 impact resistance, PC Reflector.
Hook mount and NPT pipe Pendant mount.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating. custom colors available.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location. Significantly reducing maintenance needs and expense over the life of the fixture.
5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at email@example.com
M10 x 1.5 mm
3/4” NPT pipe size
(Verify more NPT pipe size with factory)
Copyright © 2013-2018 Duke Light Co., Ltd. All rights reserved.
Duke Light Co., Ltd. reserves the right to change materials or modify the design of it products without notification as part of the company’s continuing products improvement and innovations program.
Specification Revise SEP-2018