Duke Light’s LED-HB-2020 Series LED high-bay and low-bay lighting fixture with Glass Lens Beam Angle 90 Degree, Aluminum die-cast heat sink, has more sturdy and durable. High-temperature-resistant high-borosilicate glass optical lens, it will never change yellow, ensures a high efficiency of light output. making it an ideal choice for retail lighting, commercia lighting, Industrial lighting and architectural lighting applications.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
General Area Spaces Lighting
Grocery Store Lighting
LED-HB-2020 Series for high/low bay lighting expands the application range, replacing from 150W PSMH.
Efficient light output, advanced optics and drive systems, significantly improving the economic value of end-use applications.
LM80 COB LEDs up to 140 lm/w, L70@25°C 50,000+ hours, High transmittance (93%) glass lens. Non-yellow.
IP67 Optics IP rating, Aluminum die-cast fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
UL Listed Class I drivers, IP67 waterproof rating used for wet location. IP68 Waterproof connector, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input).
IP67 rating housing, One-piece metal stamping aluminum driver box, Aluminum die-case housing for excellent durability and strength. IK10 impact resistance.
Hook mount and NPT pipe Pendant mount.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating. custom colors available.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location. Significantly reducing maintenance needs and expense over the life of the fixture.
5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at firstname.lastname@example.org
M10 x 1.5 mm
3/4” NPT pipe size
(Verify more NPT pipe size with factory)