Duke Light’s LED-LB-2002-AL Series LED high-bay and Low-bay fixture Has the appearance and innovation of the thermal structure design patents, provides an unmatched combination of high performance and affordability, eliminating the need for energy-wasting fluorescent and HID high-bay luminaires, making it an ideal choice for retail and commercial applications.
Certification:
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
Application:
Sports Lighting
Retail Lighting
Showroom Lighting
General Area Spaces Lighting
Warehouse Lighting
Factory Lighting
Grocery Store Lighting
Gymnasium Lighting
etc.
Product Information:
LED-LB-2002-AL Series for high/low bay lighting expands the application range, replacing from 250W PSMH.
Efficient light output, advanced optics and drive systems, significantly improving the economic value of end-use applications.
Light Engine:
LM80 COB LEDs up to 140 lm/w, L70@25°C 50,000+ hours, High transmittance (90%) PC Dome and 16 inch Aluminum hood. Non-Glare.
IP67 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
Electrical:
UL Listed Class I drivers, IP67 waterproof rating used for wet location. IP68 Waterproof connector, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input).
Housing:
IP67 rating housing, One-piece metal stamping aluminum housing for excellent durability and strength. IK8 impact resistance, Aluminum hood.
Hook mount and NPT pipe Pendant mount.
Accessories available.
Finish:
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating. custom colors available.
Expected Life:
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location. Significantly reducing maintenance needs and expense over the life of the fixture.
Warranty:

5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
Specifications / Performance:
Model No. | LED-LB-2002-AL- 080-850-UNV | LED-LB-2002-AL- 100-850-UNV | LED-LB-2002-AL- 120-850-UNV |
Rated Watts | 80 | 100 | 120 |
System Watts | 82 | 102 | 122 |
Initial Lumens | 9,020 | 11,220 | 13,420 |
Line Voltage [VAC] | 120 - 277 | 120 - 277 | 120 - 277 |
Max Line Current [Amp@120-277VAC] | 0.68 - 0.30 | 0.85 - 0.37 | 1.02 - 0.44 |
Light Engine Watt x Units | 30 x 4 | 30 x 4 | 30 x 4 |
Driver Power Watt x Units | 80 x 1 | 100 x 1 | 120 x 1 |
Characteristics / Data:
Testing Compliance | UL 1598 Standard |
Surge Protection | 10KV / 5KA per ANSI/IEEEC62.61 |
FCC Compliance | Part 15, Subp. C |
IEC Protection Classes | Class I per IEC 61140 |
Ambient Temperature | 40°C to +65°C (-40°F to +149°F) |
Luminaire Vibration | 3G (ANSI C136.31-2010) |
Housing IK Rating | IK10 |
Housing IP Rating | IP44 |
Driver IP Rating | IP67 |
Optics IP Rating | IP65 |
Outdoor Rated | Wet Location |
Light Engine | L70 Rated Lifetime of 50,000+ hours. |
Driver | UL / CUL Listed Constant Current |
Input Universal Line Voltage | 120-277 VAC |
Input Line Frequency | 50 / 60 Hz |
Power Factor | > 0.9 |
Total Harmonic Distortion(THD) | <20% |
Color Temperature | 5,000°K |
Color Rendering Index(CRI) | >80 |
Lumens Per Watt (Typical) | >110 |
Environment Friendly | RoHS Compliant |
Warranty | 5 Year Limited Warranty |
DISTRIBUTION:
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at layout@dukelight.com