Duke Light’s LED-HPB-2002 Series LED high power bulb retrofit kit light fixture Has the appearance and innovation of the thermal structure design patents, provides an unmatched combination of high performance and affordability, eliminating the need for energy-wasting fluorescent and HID high-bay luminaires, making it an ideal choice for retail and commercial applications.
Upgrading to LED lighting has never been so easy: improve energy efficiency, reduce maintenance costs and reuse the existing high-bay and low-bay luminaire.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
General Area Spaces Lighting
LED-HPB-2002 Series can be used as a traditional HID high-power bulb the best retrofit kits, replacing from 200W HID.
Efficient light output, advanced optics and drive systems, significantly improving the economic value of end-use applications.
LM80 COB LEDs up to 120 lm/w, L70@25°C 50,000+ hours, High transmittance (90%) PC Dome and 16 inch Aluminum hood.
IP65 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
Waterproof connector, in gearbox, for attachment of incoming primary wiring is supplied.
Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C.
Available with universal voltage power supply 120-277VAC (50/60Hz input).
One-piece metal stamping aluminum housing contains gasketed.
All hardware is stainless steel and anodized aluminum material.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location.
Warranty:5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
Specifications / Performance:
|120 - 277||120 - 277|
|Max Line Current|
|0.68 - 0.30||0.85 - 0.37|
Watt x Units
|30 x 4||30 x 4|
Watt x Units
|100 x 1||100 x 1|
Characteristics / Data:
|Testing Compliance||UL 1598 Standard|
|Surge Protection||10KV / 10KA per ANSI/IEEEC62.61|
|FCC Compliance||Part 15, Subp. C|
|IEC Protection Classes||Class I per IEC 61140|
|Ambient Temperature||40°C to +65°C (-40°F to +149°F)|
|Luminaire Vibration||3G (ANSI C136.31-2010)|
|Housing IK Rating||IK8|
|Housing IP Rating||IP44|
|Driver IP Rating||IP67|
|Optics IP Rating||IP65|
|Outdoor Rated||Wet Location|
|Light Engine||L70 Rated Lifetime of 50,000+ hours.|
|Driver||UL / CUL Listed Constant Current|
|Input Universal Line Voltage||120-277 VAC|
|Input Line Frequency||50 / 60 Hz|
|Power Factor||> 0.9|
|Total Harmonic Distortion(THD)||<20%|
|Color Rendering Index(CRI)||>80|
|Lumens Per Watt (Typical)||>120|
|Environment Friendly||RoHS Compliant|
|Warranty||5 Year Limited Warranty|
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at email@example.com
(Verify NPT stem size with factory)
Action, please send inquiry to us, we will promptly reply to you.