Duke Light’s LED-HPB-2005 Series LED high power bulb retrofit kit light fixture Has the appearance and innovation of the thermal structure design patents, provides an unmatched combination of high performance and affordability, eliminating the need for energy-wasting fluorescent and HID high-bay luminaires, making it an ideal choice for retail and commercial applications.
Upgrading to LED lighting has never been so easy: improve energy efficiency, reduce maintenance costs and reuse the existing high-bay and low-bay luminaire.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
General Area Spaces Lighting
Grocery Store Lighting
LED-HPB-2005 Series can be used as a traditional HID high-power bulb the best retrofit kits, replacing from 250W PSMH.
Efficient light output, advanced optics and drive systems, significantly improving the economic value of end-use applications.
LM80 COB LEDs up to 140 lm/w, L70@25°C 50,000+ hours, High transmittance (90%) PC Dome. Non-Glare.
IP67 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -3 in 1 dimming controls by the three methodologies: 1-10 VDC Voltage, 10V PWM Signal, 10K/N~100K/N Ohms resistance.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
UL Listed Class I drivers, IP67 waterproof rating used for wet location. IP68 Waterproof connector, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input).
IP65 rating housing, One-piece metal stamping aluminum housing for excellent durability and strength. IK10 impact resistance, PC Dome.
Hook mount and NPT pipe Pendant mount and E39/E40 Mogul Base mount.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating. custom colors available.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location. Significantly reducing maintenance needs and expense over the life of the fixture.
5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
Specifications / Performance:
|120 - 277||120 - 277||120 - 277|
|Max Line Current|
|0.68 - 0.30||0.85 - 0.37||1.02 - 0.44|
Watt x Units
|30 x 4||30 x 4||30 x 4|
Watt x Units
|80 x 1||100 x 1||120 x 1|
Characteristics / Data:
|Testing Compliance||UL 1598 Standard|
|Surge Protection||20KV / 10KA per ANSI/IEEEC62.61|
|FCC Compliance||Part 15, Subp. C|
|IEC Protection Classes||Class I per IEC 61140|
|Ambient Temperature||40°C to +65°C (-40°F to +149°F)|
|Luminaire Vibration||3G (ANSI C136.31-2010)|
|Housing IK Rating||IK10|
|Housing IP Rating||IP65|
|Driver IP Rating||IP67|
|Optics IP Rating||IP67|
|Outdoor Rated||Wet Location|
|Light Engine||L70 Rated Lifetime of 50,000+ hours.|
|Driver||UL / CUL Listed Constant Current|
|Input Universal Line Voltage||120-277 VAC|
|Input Line Frequency||50 / 60 Hz|
|Power Factor||> 0.9|
|Total Harmonic Distortion(THD)||<20%|
|Color Rendering Index(CRI)||>80|
|Lumens Per Watt (Typical)||>120|
|Environment Friendly||RoHS Compliant|
|Warranty||5 Year Limited Warranty|
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at firstname.lastname@example.org
M20 x 1.5 mm
3/4” NPT pipe size
(Verify more NPT pipe size with factory)