Duke Light’s LED-SL-811 Series Street Roadway Light Fixtures, From rural street lighting to storage facilities, resulting in expedient payback with less than half the wattage of comparable traditional solutions.
With a low-profile modular design this aesthetically pleasing luminaire provides improved illumination performance while reducing energy consumption.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
Parking Lot Lighting
General Area Spaces Lighting
LED-SL-811 Series is efficient solution lowers energy consumption compared to traditional HID fixture for additional operating cost savings, replacing from 200W HID.
This reliable unit has a 75,000 hour rated life, significantly reducing maintenance needs and expense over the life of the fixture.
LM80 COB LEDs up to 120 lm/w, L70@25°C 50,000+ hours, High transmittance (90%) PC cover.
IP65 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
Waterproof connector, in gearbox, for attachment of incoming primary wiring is supplied.
Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C.
Available with universal voltage power supply 120-277VAC (50/60Hz input).
Aluminum die-casting housing contains heat sink fins. The modern design incorporates the heat sink directly into the unit for heat transfer to prolong LED life.
All hardware is stainless steel and anodized aluminum material.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location.
Warranty:5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
Specifications / Performance:
|Line Voltage [VAC]||120 - 277|
|Max Line Current [Amp@120-277VAC]||0.52 - 0.22|
|Light Engine Watt x Units||30 x 3|
|Driver Power Watt x Units||60 x 1|
Characteristics / Data:
|Testing Compliance||UL 1598 Standard|
|Surge Protection||20KV / 10KA per ANSI/IEEEC62.61|
|FCC Compliance||Part 15, Subp. C|
|IEC Protection Classes||Class I per IEC 61140|
|Ambient Temperature||40°C to +65°C (-40°F to +149°F)|
|Luminaire Vibration||3G (ANSI C136.31-2010)|
|Housing IK Rating||IK8|
|Housing IP Rating||IP65|
|Driver IP Rating||IP67|
|Optics IP Rating||IP65|
|Outdoor Rated||Wet Location|
|Light Engine||L70 Rated Lifetime of 50,000+ hours.|
|Driver||UL / CUL Listed Constant Current|
|Input Universal Line Voltage||120-277 VAC|
|Input Line Frequency||50 / 60 Hz|
|Power Factor||> 0.9|
|Total Harmonic Distortion(THD)||<20%|
|Color Rendering Index(CRI)||>80|
|Lumens Per Watt (Typical)||>100|
|Environment Friendly||RoHS Compliant|
|Warranty||5 Year Limited Warranty|
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at firstname.lastname@example.org
LUMINAIRE CLASSIFICATION SYSTEM (LCS) GRAPH
Percent Luminaire Lumens:
Front: Low=11.6%, Medium=24.1%, High=10.9%, Very High=1.9%
Back: Low=11.5%, Medium=24.0%, High=10.8%, Very High=1.9%
Uplight: Low=1.5%, High=1.7%
BUG Rating : B2-U3-G2
Surface Mount Dimension
Action, please send inquiry to us, we will promptly reply to you.