Duke Light’s LED-WP-711 Series classic Wall Pack Lantern Light Fixtures Designed for superior photometric performance and architectural appeal, Equipped with a new LED engine improved energy efficiency and quality of light.
The advanced LED optical system provides improved horizontal and vertical uniformity, reduced glare and improved lighting control. Duke Light’s unique optical glass lens technology effectively aims the light where you need it, while eliminating the unsightly shadow circles commonly seen under other LED wall pack light fixtures.
(This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.)
Building Accent Lighting
General Area Spaces Lighting
Duke Light’s LED-WP-711 Series classic Wall Pack Lantern Light Fixtures Designed for superior photometric performance and architectural appeal, Equipped with a new LED engine improved energy efficiency and quality of light. The advanced LED optical system provides improved horizontal and vertical uniformity, reduced glare and improved lighting control.
Duke Light’s unique optical glass lens technology effectively aims the light where you need it, while eliminating the unsightly shadow circles commonly seen under other LED wall pack light fixtures.
LM80 COB LEDs up to 140 lm/w, L70@25°C 50,000+ hours, High-temperature-resistant high-borosilicate glass optical lens, never yellow, long-term high transmittance.
IP68 Optics IP rating, One-piece metal stamping process Technology aluminum fin heat sink for maximum heat dissipation.
Energy Saving Control Options:
010DIM – 0-10 volt -dimming enabled with controls by others.
MS – Motion Sensor switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 10% maximum drive current.
ZRDIM – Zigbee 2.4GHz Remote with controller in each fixtures, can be put all the fixtures simple mesh grouping control Programming ON/OFF, Programming Dimming.
UL Listed Class I drivers, IP67 waterproof rating used for wet location. IP68 Waterproof connector, for attachment of incoming primary wiring is supplied. Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input).
IP65 rating housing, Aluminum die-casting housing for excellent durability and strength. High Efficiency, Flame Class V-2 flame retardant UL listed material, IK8 impact resistance, UV protected, non-yellowing polycarbonate refractor.
An enduring powder-coated finish provides long-term protection against ultraviolet light and chipping.
Over chromate conversion coating. custom colors available.
Minimum 50,000 hours to 75,000 hours depending upon the ambient temperature of the installation location. Significantly reducing maintenance needs and expense over the life of the fixture.
5 Year Limited Warranty on Light Engine, Driver, & Housing.
Optional 10-Year Manufacturer’s Warranty Available.
For more support, Please consult factory.
Specifications / Performance:
|Line Voltage |
|120 - 277||120 - 277||120 - 277||120 - 277|
|Max Line Current |
|0.35 - 0.15||0.52 - 0.22||0.68 - 0.30||0.85 - 0.37|
|Light Engine |
Watt x Units
|20 x 4||20 x 4||30 x 4||30 x 4|
|Driver Power |
Watt x Units
|75 x 1||75 x 1||100 x 1||100 x 1|
Characteristics / Data:
|Testing Compliance||UL 1598 Standard|
|Surge Protection||20KV / 10KA per ANSI/IEEEC62.61|
|FCC Compliance||Part 15, Subp. C|
|IEC Protection Classes||Class I per IEC 61140|
|Ambient Temperature||40°C to +50°C (-40°F to +122°F)|
|Luminaire Vibration||3G (ANSI C136.31-2010)|
|Housing IK Rating||IK8|
|Housing IP Rating||IP65|
|Driver IP Rating||IP67|
|Optics IP Rating||IP68|
|Outdoor Rated||Wet Location|
|Light Engine||L70 Rated Lifetime of 50,000+ hours.|
|Driver||UL / CUL Listed Constant Current|
|Input Universal Line Voltage||120-277 VAC|
|Input Line Frequency||50 / 60 Hz|
|Power Factor||> 0.9|
|Total Harmonic Distortion(THD)||<20%|
|Color Rendering Index(CRI)||>80|
|Lumens Per Watt (Typical)||>130|
|Environment Friendly||RoHS Compliant|
|Warranty||5 Year Limited Warranty|
PHOTOMETRICS & Application layouts are available upon request.
Contact DUKE Applications Group at firstname.lastname@example.org
Type II Short, POLAR GRAPH
Maximum Candela = 5561.461 Located At Horizontal Angle = 82.5, Vertical Angle = 50
# 1 – Vertical Plane Through Horizontal Angles (82.5 – 262.5) (Through Max. Cd.)
# 2 – Horizontal Cone Through Vertical Angle (50) (Through Max. Cd.)
Type II Short, TEMPLATE
Scale: 1 Mesh = 10 Ft.
Light Loss Factor = 1.00
Total Lamp Lumens = 13267.9
MH = 10.00 Ft, Tilt = 0 Degrees
Maximum Calculated Value= 26.91 Fc
Horizontal Beam Angle (50%): 138.5°
Vertical Beam Angle (50%): 79.8°
Type II Short, LUMINAIRE CLASSIFICATION SYSTEM (LCS) GRAPH
Percent Luminaire Lumens:
Front: Low=11.8%, Medium=35.1%, High=10.1%, Very High=0.9%
Back: Low=5.9%, Medium=19.6%, High=11.2%, Very High=1.6%
Uplight: Low=0.9%, High=2.8%
BUG Rating : B3-U3-G3